Answer
Sep 23, 2021 - 03:18 PM
We offer a number of options to add Under-Glow lighting to your coach. It really depends on how much lighting you want to add (and your overall budget). While we can build a light kit to fit virtually any type of vehicle, we offer two pre-made configurations for under-glow lighting on RVs.
The first pre-made kit is our base Under-Glow kit. This kit will light up the area between your steer and drive axle. It's avaialble in both multi-color (RGB or RGBWW) and single color. The base kit provides two - 16' long LED strips (each with 300 LEDs) designed to be mounted to the bottom of your coach between the drive axle and the steer axle or, if a travel trailer or fifth wheel trailer, immediately in front of the first axle. The kit includes you choice of LED controllers. The kit is also expandable should you wish to add more lighting in the future. The product description and related tabs provide significantly more detail about each. Here are links to those base products:
Multi-Color (RGB) Base Under-Glow Single-Color Base Under-Glow Multi-Color RGBWW Base Under-Glow
The second pre-made Under-Glow configuration is our FULL-PERIMETER Under-Glow Kit. As the name suggests, this kit contains the items needed to light up the full perimeter of the RV: both sides, front and rear (see layout diagrams below). While the full perimeter kit has been sized to fit both Class A motorhomes and fifth wheel trailers in the 35-45' range we recommend first taking some measurements under your RV to see how much room you have to mount the LED strips. When doing so, be mindful where you might be able to mount the LED light strips. Our surface mounted LED strips need a smooth, clean, flat, straight area about 2" wide that doesn't span multiple surfaces. The strips are flexible but they need to be mounted on a smooth, straight, flat, rigid surface. The minimum length of a LED strip is about 4" (3 LEDs). The maximum length of a single LED strip is about 16' (300 LEDs). There are 100 possible length combinations. Longer distances can be covered with multiple strips. In some cases you might have to build out a suitable mounting surface using aluminum flat bar which is then affixed to the vehicle using screws, rivets, zip ties or 3M dual lock re-closable fasteners. Take a look at the layout diagrams below which show the configurations offered for the full perimeter under-glow. If the stock pre-made configuration doesn't work for your RV, let us know. We can usually adjust the lengths in the kit to fit your specific installation requirements.
Multi-Color (RGB) Full-Perimeter RV Under-Glow
- NOTE: The 'CONFIGURATIONS' tab on this product lists the LED strip lengths included in the kit. Make sure you compare those lengths with the lengths you need for your RV.
Our pre-made light kits provide the essential components needed for a high-quality, functioning lighting system. Installation of our light kit to your specific vehicle may however require additional items to make it look and fit the way you want. This is particularly the case with electrical wiring and mounting of LED strips. Before proceeding with your installation we suggest you consider
There is a THIRD OPTION as well: BUILD YOUR OWN UNDER-GLOW KIT. If you want RGB and FULL-PERIMETER but the above configurations don't work for your specific setup you can design your own lighting to fit exactly the areas you want to light using one of these newly developed Build Your Own Kits -
If you want to see what other customer's have done with their RVs, take a look at our
